Rear bumper fillers- Made from TPO Plastic Compound ( for buick regal 1981-87)
Flexible - OE Style
These are NOT the Rigid ABS or Fiberglass units currently on the market.
This is plastic TPO compound is flexible & durable.
There is no need to fill voids in the material, cut off excess flashing, trim to fit.
These are ready to Scuff, Flex Adhesive Promote & Color Paint
NOTE: When painting any raw plastic bumper or filler to ensure adhesion, flexibility, and long-term durability of the topcoats you must first thoroughly wash the part inside & out with hot water & a PH neutral wax-free soap solution. Dawn dish detergent is commonly used for this process. You must also use an adhesion promoter & flex adhesive in your primer, base coat & clear coat. Finally DO NOT use any chemical based cleaners on the part before applying primer or paint as they can damage the part!! It is recommended to use either a water-based wax cleaner or a 1-1 mixture of isopropyl alcohol & de-ionized water.**
Crisp, Clean & Smooth Body Lines
All Mounting points and coverage right down to the flare out just inside the bumper ends are there - just like the originals!
Please inquire for an exact shipping quote. Shipping for fronts only range from approximately $20-$60 to most states. If you place this in your cart, you will only receive an avg shipping.