Front bumper fillers- Made from TPO Plastic Compound ( for buick regal 1981-87) ( If out of stock, These front fillers may still be available when purchasing a complete set, see sku #Bumper Fillers - Complete Set - Front Pair & Rear Pair - Flexible Plastic - OE Style)
These are NOT the Rigid ABS or Fiberglass units currently on the market.
This is plastic TPO compound is flexible & durable.
There is no need to fill voids in the material, cut off excess flashing, trim to fit.
These are ready to Scuff, Flex Adhesive Promote & Color Paint
NOTE: When painting any raw plastic bumper or filler to ensure adhesion, flexibility, and long-term durability of the topcoats you must first thoroughly wash the part inside & out with hot water & a PH neutral wax-free soap solution. Dawn dish detergent is commonly used for this process. You must also use an adhesion promoter & flex adhesive in your primer, base coat & clear coat. Finally DO NOT use any chemical based cleaners on the part before applying primer or paint as they can damage the part!! It is recommended to use either a water-based wax cleaner or a 1-1 mixture of isopropyl alcohol & de-ionized water.**
Crisp, Clean & Smooth Body Lines
All Mounting points and coverage right down to the flare out just inside the bumper ends are there - just like the originals!
Mounting Reinforcements are also included like the originals and are EDP coated for corrosion protection.
The plastic retaining push plugs that attach each inner corner to the header panel (at the grille opening) are also included.
Need the rear bumper fillers also???? You can order our SKU # BFRP-2 ( Rear flexible fillers 2 pc)
Want to save $$ - pay with a postal money order and you'll save $$
Please inquire for an exact shipping quote. Shipping for fronts only range from approximately $30-$60 to most states. If you place this in your cart, you will only receive an avg shipping.
2 Reviews Hide Reviews Show Reviews
Accurate plastic shape
The shape of these bumper fillers is very much the same as the original parts. The plastic material is much more rigid then the originals. The parts lose a star because the metal bracket across the is not galvanized (like the original), it does not clip onto the bottom of the headlight bucket, and it is thinner than the original. If I keep them; I will use the old metal bracket.
front inner filler bumper
It was good and it was very same perfect thanks.