Front & Rear bumper fillers - Made from TPO Plastic Compound (not fiberglass, not ABS plastic)

These are NOT the Rigid ABS or Fiberglass units currently on the market. 

This is plastic TPO compound which is flexible & durable. 

There is no need to fill voids in the material, cut off excess flashing, trim to fit. 

These are ready to Scuff,  Flex Adhesive Promote & Color Paint

NOTE: When painting any raw plastic bumper or filler to ensure adhesion, flexibility, and long-term durability of the topcoats you must first thoroughly wash the part inside & out with hot water & a PH neutral wax-free soap solution. Dawn dish detergent is commonly used for this process. You must also use an adhesion promoter & flex adhesive in your primer, base coat & clear coat. Finally DO NOT use any chemical based cleaners on the part before applying primer or paint as they can damage the part!! It is recommended to use either a water-based wax cleaner or a 1-1 mixture of isopropyl alcohol & de-ionized water.**

Crisp, Clean & Smooth Body Lines 

All Mounting points and coverage right down to the flare out just inside the bumper ends are there - just like the originals! 

Front Mounting Reinforcements are also included like the originals and are EDP coated for corrosion protection.  

The plastic retaining push plugs for front that attach each inner corner to the header panel (at the grille opening) are also included.  

If you only need JUST the Fronts, or JUST the rears, see our other sku numbers: BFFP-2 (Front flexible fillers 2 pc) or BFRP-2 ( Rear flexible fillers 2 pc)

Please inquire for an exact shipping quote. Shipping for fronts only range from approximately $30-$60 to most states. If you place this in your cart, you will only receive an avg shipping.